Lots of users have reported that they experience Epson error code 0x10 while operating the new Epson printer. However, this error code also occurs on the old Epson printers.
Most of the time, due to the internal hardware fault, you might have to deal with the problem. On the older printer, a power surge can be responsible for this flaw.
Sometimes, because of the damaged printer driver, this error code might pop up on the display. This issue specifies that the printer scanner is broken. Fortunately, there are several ways that you can try to fix this problem.
4 Reliable Hacks to Fix Epson Scanner Error Code 0x10
As you have already got an idea about the root cause of this Epson printer error code 0x10, take a quick glance at the possible solutions to fix this issue.
Solution 1: Physically Inspect the Scanner
At first, you are strongly advised to lift the scanner cover and then search for any jammed paper, dust or any other objects. In case, you find any unwanted debris, then remove them carefully.
Once done, then close the cover of the scanner and restart your Epson printer, insert the papers within the paper tray and try to print a document.
Solution 2: Reset the Epson Printer
In case, the above solution is unable to fix the problem, its time to reset the printer. For that, you have to detach the printer from the power socket. After that, wait for some time.
Next, press the Power button of the printer for at least 1 to 2 minutes. Again, connect the Epson printer to the power supply. Restart the device, load paper in the paper tray and try to scan a document.
If you can successfully do so, then the problem is resolved, else, move to the next solution.
Solution 3: Check the Printer Driver
As said earlier, due to a faulty or damaged printer driver, this Epson error might initiate. In such a scenario, you have to check and change the printer driver.
To implement the task, here are the points that need to follow:
- In the beginning, you need to power on both the computer as well as the Epson printer. Furthermore, you should allow the computer to directly download the software.
- Then, you should choose the installation settings and after that, mark the dialogue box beside the ‘change device installation setting’ option.
- If a confirmation message appears on the screen, tap on the Yes button and furthermore select the ‘Save the Changes’ option.
- Then, you need to connect the Epson printer to the computer as well as allow Windows to detect a computable driver.
In case, the Windows detect a driver, then it will automatically download and update it. During the updating procedure, you should not interrupt the procedure.
When finished, exit from the window and reboot your computer and printer. Insert some paper in the printer and try to scan. Still unable to do so? Immediately proceed to the next techniques.
Solution 4: Fix the hardware Issue
Lots of free tools are available on the internet that you can download and use to eradicate the error code 0x10. However, if you don’t know how to use these tools, you are suggested to take proper advice.
Frequently Asked Questions
1. What to do if the Printer is not Connecting to the Computer?
At first, you should visit the official website of the manufacturer and check for the driver update or manual guide. Also, take a USB cable and then connect the smaller end to the printer.
The other end must be connected to the USB port of the computer. After that, power on the printer and computer.
2. Where are the Printer Drivers Stored?
Usually, the printer drivers are stored on ‘C:\Windows\System32\DriverStore\FileRepository’ on the windows machine.
3. How to Reinstall a Printer Driver?
First, move to the Control Panel of your computer. Here, locate and tap on the “Devices and Printers” option. Furthermore, right-click on the printer that you wish to uninstall. Choose Printer Properties from the available options.
In case, the printer is connected to a network share, then tap on the Ports option and note down before continuing. Finally, close the Printer properties. Next, tap on any remaining printer and choose the Print Server properties option.
Go to the Driver tab and select the printer that you are uninstalling, furthermore chose the Remove button. Tap on the Remove driver-only option and then click on OK. To confirm the changes, click on Yes.
When finished, visit the official website of the Epson printer. From there, download and install the up-to-date version for your device.