The printer is not only meant for printing purposes but it can also help you to accomplish scanning and copying tasks as well. However, if you ever note that the Kodak printer not printing black ink, then this problem might take place due to various reasons.
Here, you will get to know all the possible causes of this problem. Getting a brief idea about the problems will help you to understand and perform the solutions stated below to get rid of the glitch with ease.
Probable reasons Why Kodak Printer Not Printing Black Ink
All these causes are counted among the prime causes behind printer not printing black ink. Thus, go through the points mentioned below:
- Error in printer calibration
- Dirty cartridges
- Malfunction in cartridge tapes
- Outdated printer drivers
4 Solutions to Fix Kodak Printer Not Printing Black Ink
We hope that you have well understood the problems. Now, you must go through these solutions that will help your printer to print black ink once again.
Method 1: Verify and Check the Printer Calibration
When you see that your printer is not printing black ink, then it might be due to incorrect calibration in the printer. Even if you have finished calibrating the device, check the settings every time, after replacing the old cartridge with a new one.
We advise you to use an excellent feature that is present in your printer, i.e “Self Diagnostic”. After installing a new cartridge, run this test. The test will assist you to detect all the internal errors so that you can resolve them easily. Along with that, you also have to run the printer’s cartridge alignment feature to resolve the issue.
Method 2: Clean the Dirty Cartridge
With heavy usage, your printer’s cartridges might become dirty and as a result, it can resist the device from printing the black ink. Thus, take out the cartridge from the printer by opening the access door.
After that, take a cotton swab dipped in alcohol and clean it gently and slowly. We also advise you to clean the printer drums in this exact same procedure. This cleaning procedure will help the printer to extract the black ink from the cartridge and you will be able to print your documents.
Method 3: Observe and Eliminate the Cartridge Tape
Whenever you buy a new cartridge, look carefully, you will be able to see that a protective plastic covering is there. The plastic cover generally prevents the ink from spilling out.
Based on facts, there are many users, who just unwrap the new cartridge and insert it in their printer without even peeling out the protective tape.
This will lead to printing problems and your printer might refuse to print black ink as well. So, you must remove the tape from the new cartridge before inserting it into the cartridge slot.
If you have already inserted the cartridge, then take it out and check whether you have removed the tape or not. Hopefully, this will resolve the issue.
Method 4: Update the Drivers of the Printer
Outdated drivers might be more or less responsible for resisting your printer from printing black ink. So, you must update all the printer drivers to their latest version. There are basically three main ways through which you can update the drivers.
First, you can download the setup files from the Kodak support page and install them one by one. Second, updating the OS will also help you to download the latest drivers. And the third is updating the drivers with the help of the Control Panel.
The first two procedures are quite easy and we hope that you can do it. Talking about the third process, open the Control Panel of your computer and click on “Category View”. Now, select the “System and Security” option.
When the “System and security” window opens, you will see the list of installed drivers. Right-click on each one of them and update the drivers.
After the successful update of all the drivers, reboot your computer as well as the printer and try to print a test page. This will help to check whether the entire operation is successful or not. We hope that now you won’t face any further problems while printing with black ink.
