Call Us Now :

Canon Printer Error B200
Printer

How To Fix Canon Printer Error B200 On Windows 10

According to the current tech report, many users are facing the problem of Canon printer error B200. The problem generally occurs due to problematic cartridges, dirty or damaged print heads or issues in the tank holder.

However, certain unknown obstructions can also lead to this problem. These are some of the prominent causes, there are more such issues that can be added to this list. Thus, you need to resolve the problem as soon as possible to prevent any further glitches.

Here, we are going to discuss the most recommendable solutions that can help you.

5 Solutions to Fix the Canon Printer Error Code B200

The only way that you can resolve the Canon printer B200 error is to follow these best possible solutions that are given below. Follow them carefully and implement them in the exact sequence provided. 

Solution 1: Reset the Ink Cartridges and Print Heads

Resetting the printing heads as well as the ink cartridges also have a high probability to resolve the error in your Canon printer. The steps to perform are given below:

  • Open the top cover of the device and you will be able to see that the cradle will pop up. As Canon printers have more than one cartridge, remove all of them one by one. 
  • Now lift the lever that is located inside the cradle to remove the print head slowly and gently. 
  • Wait for a few minutes and once again re-insert the print head back to the printer. Make sure that you have locked up the leaver tightly. 
  • After that, re-insert all the ink cartridges back to their own slots and close the door as well as the top cover. 

Now make sure that the printer is ready and it can access the cartridges as well as the printing heads. Unplug the printer to the electrical socket and leave it idle for near about 5 minutes.

After that, plug in the printer and turn it on. Try to print a page and check whether the error is there on not. If the situation remains the same, get on to the next solution. 

Solution 2: Replace the Problematic Cartridges

As you already know that the Canon printer B200 error occurs due to the presence of the defective cartridges, it will be a better idea to remove the cartridges. Along with that replace them with a new one. 

We hope that you have the printer user manual with you. Check where you can find the easy process to replace cartridges. After replacing the old one, try to print and check whether the problem persists or not. 

Solution 3: Open and Clean the Print heads

Dirty print heads are one of the reasons that can cause an error in your Canon printer. So, the only solution is to open the print head and clean it. Follow the instructions that are given above to open the printer’s print head. 

Apart from these instructions, we strongly advise you to check the user manual. Clean the print head with a thin lint-free cloth dipped in alcohol. After that, allow it to dry completely before you reinsert it into the printer. 

Solution 4: Remove any Physical Obstructions 

Sometimes, there can be other barriers inside the printer that can lead to this error. In order to fix the issue, turn off your device, open the printer and check whether any paper or any other kind of material is jammed inside. If it is so, then remove it, turn on the printer and try to print a document. 

Solution 5: Change the Ink Tank Holder

Sometimes, you can fix the issue by just changing the ink tank holder. Open the old tank holder and replace it with a new one. Again, try to print a document and note whether the problem is still occurring or not. 

Additionally, you can press and hold the “power” and “copy” buttons simultaneously. After doing this step, check the nozzle, alignment and perform the deep cleaning procedure. Hopefully, these instructions will help you to resolve the B200 error.