Call Us Now :

Printer

HP Printer won’t Turn On? Here’s What You Need To Do

Is your printer malfunctioning and HP printer won’t turn on? It is very annoying if the printer suddenly shuts down in the middle of your important work and no matter how many times you try, it does not respond to any of your efforts. 

This can be due to many reasons. Hardware problems are a probable cause but you have to consider each and every factor that could be responsible for this issue. You need to know what are the necessary steps that you can take to resolve this problem.

Therefore, a few detailed troubleshooting methods are given below to help you solve the issues.

4 Ways to Fix HP Printer Won’t Turn On Issue

Suppose you have an important project to submit and your HP printer is not responding. This could be annoying. What you need in times like this is a quick and efficient solution that can rescue you from this ordeal. 

There are several ways through which you can approach the issue. A detailed account of these methods is provided below for you to try, have a look!

Method 1: The Power Test

The first thing you need to check is if the printer is properly plugged in. Remove the printer plug from the power outlet, wait for a few seconds and plug it back in. After replugging the printer press the Power button located on it. 

See whether the power light indicator lights up or starts blinking rapidly. If none of this happens then press the Power button one more time. In this situation keep one thing in mind that sometimes the HP printers take a bit of time before powering on. 

So, be patient while performing this task. Do not press down on the Power button for an extended period of time. As it may cause the printer to power up and promptly shut down.

Method 2: Check for Hardware Damage

After completing the power test thoroughly checking the printer for any sign of hardware damage. Severe hardware damage can lead to HP printer won’t turn on. 

To check for damage, first, remove the printer from the power source. Disconnect both its power cable as well as the power module. Depending on the printer model you are using, the power module can be located either internally or externally. 

If you are using a mobile printer then a rechargeable battery works as the power supply. After you are done disconnecting the power supply of the printer check for any visible physical damage. If you find that the power cable is damaged then contact your manufacturer to have it replaced. 

You can determine if the power cable is damaged or not by doing a simple test. The power cable attached to the power module of the printer. Remove the power module from the printer and connect the power cable to your nearest power outlet. 

There is a green light located on the power module. See if the light is on after attaching the power cable to the outlet. If the light does not turn on then this indicates that the power cable is damaged. In this case, you would need to replace the cable.

Method 3: Check the Power Outlet

Starts with reattaching the power supply to the HP printer. After you are done putting things back to how they were plug in the power cable to your usual power outlet. But, make sure that you have securely connected the power cable to the power module. 

This is an important step so be cautious while performing it. Switch on the power outlet. If the printer still is not responding then change the power outlet you are currently working with. 

Plug the power cable to a new power source and turn on the power. If the printer starts working then it is obvious that the problem is with the power outlet that you normally use.

Method 4: Remove the USB Wire

This is the last method that you can do on your own in case the HP printer won’t turn on. Turn your HP printer and locate the USB connecting port. 

After finding it, disconnect the USB connector. Now, switch on the printer. If the printer starts functioning then know that faulty or damaged USB connector is the problem. 

You would be required to either remove the USB connector permanently or replace it with a new one.

Hopefully, this article was able to provide you with relevant information that you can use to solve this problem. Carefully go through the mentioned steps and your HP printer will start to work in no time.