It is reported that users often encounter the Brother printer in error state. There can be various factors responsible for this issue. The prominent factors include outdated printer driver, incorrect printer settings, certain technical complications within the print spooler service.
If you are encountering this same error, then you need to apply a few troubleshooting measures to overcome the situation on your own.
Here are the effective troubleshooting measures that you can try in order to resolve the Brother printer error. So, without further delay, let’s proceed!
In most cases, incorrect printer settings can have an impact on the printing device and lead to Brother printer in error state. In order to get rid of this situation, you can reset the printer settings.
Press the Windows logo along with the R key to launch the Run window. Under the Run dialogue box, write “devmgmt.msc” and hit the Enter button in order to execute the command successfully.
After performing this instruction, the Device Manager window will appear. Here, you need to tap on the “View” icon that is located on the top menu. Afterwards, look for the “Show Hidden Devices” and place a tick mark next to the checkbox.
In the next screen, head over to the “Ports (COM & LPT)” and hit the “Properties” button in order to open the window. Afterwards, go to the “Port Settings” tab that is situated under the
Properties” window.
Here, you need to search for the “Use any interrupt assigned to the port” option and select the box next to “Enable legacy Plug and Play detection”. Once done, proceed to click on the “Apply” button as well as the “OK” button in order to save the recent changes.
After performing the above instructions, you can restart your device. Once your device boots up, try to review whether the Brother printer error gets resolved or not. If the error still persists, then you can opt for the next method.
Here, in this procedure, we suggest you check if the Brother printer is Online. In order to review this, you need to follow the steps underneath:
Setting the print spooler service to automatic can also help you to resolve the Brother printer error. To accomplish the task, you can follow the underlying instructions carefully.
On the Run dialog box, enter “services.msc” and tap on the “OK” button to run the command. After performing this instruction, the Service window will initiate. Under the Service window, scroll through the available option unless you find the Print Spooler Service. Once you find it, proceed to tap on it and choose the “Start” button from the appeared menu.
Thereafter, hit the “Properties” icon in order to invoke the window. Navigate to the “General” tab and tap on the “Startup Type”. Further, set the “Startup Type” as “Automatic”. Once you are done with these instructions, click on the “Apply” button to save the changes. Close the Service window when you are done with this instruction.
If you do not install the Windows available updates, then the occurrence of Brother printer error is quite common. Therefore, you can easily sort out this matter by installing the Windows pending updates.
To proceed with this task, follow the steps undermentioned:
Once the installation is over, you can check whether the Brother printer in error state has been resolved or not.
If you do not install the latest version of the printer driver then you can get stuck with the Brother printer error. To prevent such glitches, always try to update the printer driver.
Here’s the instruction that you need to perform to update the printer driver.
When you are done with this method, reboot the device to save the recently made changes.
Even after updating the printer driver, if the Brother printer in error state message still persists then you might need to reinstall the printer driver.
To do the task, initiate the “Control Panel” window and head over to the “View By Large Icons” section. Under this section, locate and select the option titled “Device and Printers”.
From the result-oriented widow, proceed to right tap on the Brother printer and hit the “Remove Device” button. From the confirmation pop-up menu, select the “OK” button to confirm the process.
Once the printer driver is removed from your device, you can reboot the device. After the device boots up, visit the official website and locate the latest printer driver. Now, follow the on-screen instructions in order to download the printer driver.
A printer in error state defines that the printing device is powered on or not connected to the computer through USB cable or wireless connection. Thus, you can review printer paper and ink in order to ensure that there are sufficient paper and ink inside the device. Also, sure that there is no paper jam inside the device.
In order to reset a printer, power off the device and take out the power cable from the device. Leave the printer for at least 30 minutes. Thereafter, reconnect one end of the power cable to the back of the printer and another end to the power supply.
Power On the printing device while you are pressing the “Resume” button. Keep pressing the combination keys unless the light starts to blink. Once done, release the “Resume” button.
Your trusty laptop. Companion to countless late-night work sessions, streaming marathons, and maybe even the…
Marketing is one of the most important aspects of a business because it is what…
If you are a hardcore gamer and love to show your gaming skills by live…
AT&T’s U-verse is one of the oldest telecommunication service providers of the global market. From…
Epson error code 0xfa appears due to the use of the Epson WF-3540 printer for…
The same way it is described in a famous fable by Ivan Krylov called “The…