Paper jamming inside the printer is one of the most reported problems that occur irrespective of the printer model you are using. When you encounter a paper jam, the device will eventually stop printing.
As the internal mechanism of the printers tends to vary from one model to another, here are the general procedures that will help you on how to fix a paper jam on a Canon printer. All you need to do is to know the probable causes behind the issue and follow the solutions as given below.
Paper jams in your Canon printers can occur due to obvious reasons. Those reasons are here as follows:
Let’s now dive into the best possible solutions that will be helpful to resolve the issue. Go through all the solutions that are given below.
While the printer is printing a document, a paper might get stuck inside and the device will gradually stop printing. All you need to do is just open the paper loading tray and see the exact place where the paper got jammed. When you see it, remove the jammed paper slowly and gently.
After removing the whole paper, check and remove any sort of tiny paper bits remaining in the printer. Now, close the paper tray and continue the printing process.
If you cannot find the paper jams in the paper loading tray, then check the rear side of the printer. After that follow these two methods to clear up the paper jams easily.
In order to remove the jammed paper, find out the access tab or knob that is present at the backside of the printer and unlock the knob. After that, remove the panel gently and carefully, pull out the jammed paper and its tiny bits. At the end of this removing operation, close the rear access panel.
To open the two-sided printing accessory, press and release the buttons simultaneously at the end of the module that is present there. Now, remove the panel carefully and you will easily see the jammed paper. Clear it and perform the reverse process to close the module.
Papers can also get jammed inside the module panel. To remove the paper, press the button that is present at the top of the module and open the access door. You will be able to see the jammed paper. Remove it and close the module door.
When all of the previous solutions don’t work, then you can check under the front cover of the printer whether any papers are jammed in that area or not. If you find one, then carefully and slowly remove it. If you cannot do it, seek assistance to perform this operation.
Now, close the front cover and make sure that the printer carriage is working. After that, print a test page and check whether that paper jam is occurring once again or not.
When you see that Canon printer paper jam no paper in the tray, then there must be some hardware problems within your printer that seem like paper jams. These problems can arise due to malfunctions in printer rollers, paper feed mechanisms, and others.
In such situations, you need to repair the printer’s hardware components or replace them with a new one.
Your trusty laptop. Companion to countless late-night work sessions, streaming marathons, and maybe even the…
Marketing is one of the most important aspects of a business because it is what…
If you are a hardcore gamer and love to show your gaming skills by live…
AT&T’s U-verse is one of the oldest telecommunication service providers of the global market. From…
Epson error code 0xfa appears due to the use of the Epson WF-3540 printer for…
The same way it is described in a famous fable by Ivan Krylov called “The…